eMachines EL1200 Series - Manual (Page 57)

47
2 To create recovery discs for the hard drive’s entire
original contents, including Windows Vista and
all factory-loaded software and drivers, click
Create factory default disc
.
- OR -
To create recovery discs for only the
factory-loaded software and drivers, click Create
driver and application backup disc
.
The Create Backup Disc dialog box opens.
This dialog box tells you the number of blank,
recordable discs you will need to complete the
recovery discs. Make sure that you have the
required number of identical, blank discs ready
before continuing.
3 Insert a blank disc into the drive indicated in the
Burn to
list, then click Next. The first disc begins
recording, and you can watch its progress on the
screen.
When the disc finishes recording, the drive ejects
it.
Important
We recommend that you create each type of recovery
disc as soon as possible.