Operation and service information – E-Z-GO ST 480 User Manual

Page 38

Advertising
background image

OPERATION AND SERVICE INFORMATION

3-30

Read all of manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notes, Cautions and Warnings

If oil is required, remove oil fill cap and add oil slowly to bring level to the
FULL mark. Do not overfill.

Replace dipstick fully into dipstick tube and firmly replace the oil fill cap.

When adding oil between oil changes, do not mix
brands and viscosity grades of oil. Both the oil dip-

stick and fill cap must be in place before operating the engine.
Failure to install the dipstick and fill cap will result in oil becoming
contaminated and/or oil being discharged into the engine com-
partment.

CHANGING THE OIL

Tool List

Qty. Required

Pliers......................................................................................1

Oil drain pan ..........................................................................1

Clean cloth.............................................................................2

For maximum performance and longevity, the engine oil should be
replaced after the first five (5) to eight (8) hours of operation. After the
initial oil change, it should be changed per the Periodic Service Sched-
ule (Ref Fig. 22 on page 3-26).

Fig. 24 Oil Fill Cap, Dipstick and Fuel Filter

Fig. 25 Clean Entire Dipstick

Fuel Line
From Tank

Fuel

Pump

Fuel
Filter

Oil
Dipstick

Oil Fill

Cap

ADD

FULL

Fig. 26 Check Oil Level on Dipstick

Maximum oil level
DO NOT OVERFILL

ADD

FULL

Advertising