Instruction manual 6, Installation (continued), Connecting a/v equipment – Emerson EMTV21785 User Manual
Page 25: Input from device to tv, Output from tv to device
Instruction Manual
6
INSTALLATION (continued)
Connecting A/V Equipment
The following are diagrams showing basic instructions for attaching external equipment, like a VCR or DVD player, to your
TV set. Please refer to operation manuals of external audio/video equipment that will be connected to your set for
additional instructions. PLEASE TURN OFF ALL POWER BEFORE CONNECTING DEVICES TOGETHER.
The side terminals may be easier to use with a camcorder. The connections are identical.
Coaxial Cable
RF IN
VCR
DVD Player
Camcorder
VCR
VCR
AUDIO/VIDEO OUT
AUDIO/VIDEO IN
Connect VCR's RF OUT terminal to the RF IN jack located on the real panel of the TV.
Input from Device to TV
DO NOT use the DVD IN terminals and AV IN (2) terminals at the same time.
DO NOT connect side AV IN (1), rear AV IN(1)
and S-Video terminals at the same time.
Use only one of the three.
With DVD signal input, there is no DVD video output. Also, remember to connect the
audio cables when using S-Video and DVD terminals.
Output from TV to Device
With S - VIDEO Terminal
YCbCr
VIDEO
AUDIO
VIDEO
AUDIO