Emerson EMTV21785 - Manual (Page 30)

Instruction Manual
11
FUNCTIONS & FEATURES (continued)
Useful Remote Control Features (continued)
P.mode
Your TV has factory preset picture modes that allow you to optimize your TV viewing. To activate these picture
modes, press the P. MODE key, and you can choose among User, Normal, Movie and Sports.
S.mode
Press the S. MODE key repeatedly, and you can choose among User, Normal, Movie, Speech and Music.
Recall
This key will allow you to return to the last channel you were viewing. Pressing it again will return you to the channel
you just left.
Favorite
This key will display the favorite channel if a favorite channel is set.
CC
Pressing the CC key will activate the currently selected Closed Caption or Text. Press the key repeatedly to select
another mode in turn.
OFF → CC1 → CC2 → CC3 → CC4 → T1 → T2 → T3 → T4
Video
This key allows you to toggle between antenna mode and different video modes cyclically.
Child Lock
The Child Lock feature prevents unauthorized viewing of the TV. To activate, press and hold the F key, and then
press MUTE. This will lock out all remote functions (except for Standby) and Child Lock On will be displayed for 6
sec. You can see only the current channel with normal picture and sound. With Child Lock set before turn-off, no
picture and no sound are available from the TV if the TV is turned on again, but only Child Lock On displayed. To
unlock the TV, press and hold the F key and press MUTE. This will unlock the TV. Please note that the only way to
activate or deactivate the Child lock feature is via remote control - please insure that it is stored securely.
Sleep
Press the SLEEP key repeatedly to switch the TV to one of the following modes cyclically: Off→15→30→45→60→
90→120→150→180 (Unit: Minute). With Sleep Off set, press the SLEEP key firstly to display the remaining time
and press it secondly to re-set the Sleep Off time.
"TV will turn off soon! " will be displayed on the screen one minute before the Sleep timer runs out.
MTS/SAP
In the TV mode, the TV can automatically identify MTS stereo modes to one of Mono, Stereo, Stereo/SAP and
Mono/SAP. Under no signal condition, the audio mode does not appear on the screen.
When receiving signals from external equipment in the Video mode, Stereo is defined as default. Press the
MTS/SAP key repeatedly to set Input to Stereo, L or R.
Press the key firstly after OSD disappears to display the auto-identified MTS mode. Press it again before the OSD
disappears to compulsorily set another MTS mode.
Signal Received Press MTS/SAP key
STEREO STEREO, MONO
MONO/SAP SAP, MONO
STEREO/SAP STEREO, SAP, MONO
MONO MONO
Label
This key functions only in the TV mode. For an explanation of this feature, please see page 9.