Emerson EMTV21785 - Manual (Page 26)

Instruction Manual
7
FUNCTIONS & FEATURES
Turn On/Off
1. Turn On
Plug in the supply cord, and press the MAIN POWER SWITCH on the TV. The TV will enter the STANDBY mode, and the
power indicator light will turn on. Pressing the STANDBY or CH+/- on the remote control or – CH + on the TV can turn on
the TV. Also, the power indicator light on the TV will turn off.
2. Standby (Soft Off)
While the TV is on, press the STANDBY key. This will put the TV in Standby or soft off mode. The power indicator light
on the TV set will turn on.
3. Auto off when no signal received
The TV set will automatically enter into Standby mode when the following conditions are met.
1) TV is in antenna mode.
2) Current channel has no signal.
3) No key is pressed within 15 minutes.
Basic Functions
Changing the Channel
While in TV mode, press the CH +/ - keys to change the channel, or use the numeric keypad to enter a new channel.
Adjusting the Volume
To increase or decrease the volume, press the VOL +/ - keys. The volume adjustment ranges from 0 to 100.
Muting the Volume
To mute the volume, press the MUTE key. To restore the volume, press MUTE again.
Function Selection Menus
Main menu can be accessed by pressing the MENU key on the remote control or the TV . Navigation of the menus be done with the
arrows and ENTER keys on the remote or - CH + and - VOL + keys on the TV. Exit with the MENU key.
Video Setting Menu
This menu allows you to adjust the various picture settings.
Access
From the Main menu screen, press the left or right arrow key until
Video Setting is highlighted. Then the Video Setting menu is displayed.
Picture Control: Press the up or down arrow key to select Picture
Control and right arrow key or ENTER key to access the sub menu.
Use the up or down arrow key to move between the various settings,
and the left or right arrow key to adjust them.
CONTRAST: 0 (minimum contrast) to 100 (maximum contrast)
BRIGHTNESS: 0 (dimmest) to 100 (brightest)
COLOR: 0 (minimum color) to 100 (maximum color)
SHARPNESS: 0 (minimum sharpness) to 100 (maximum sharpness)
TINT: -50 (more purplish) to +50 (more greenish)
COLOR TEMP: Cool, Standard or Warm
Picture Mode: Use the left or right arrow key to select among
User, Normal, Movie and Sports.
Auto Black Lvl: This feature improves gradation of picture. Press
the left or right arrow key to set it On or Off after Auto Black Lvl is
highlighted.
Picture Control
Contrast 50
Brightness 50
Color 50
Sharpness 50
Tint 10
→ Color Temp Warm
Move: ↑↓ ADJ: ←→ Exit: MENU
Move:← → Enter: ENTER Exit: MENU
Video Setting
Picture Mode Normal
Picture Control
Auto Black Lvl On