Empire Comfort Systems VFD26F - Manual (Page 13)

Page 13 23466-0-0407
1. Remove fireplace from carton.
2. Remove mantel top and front base from mantel assembly.
3. Remove screw attached to fireplace top and through
"L Bracket" attached to back of breast board.
4. Remove mantel assembly from fireplace.
5. Remove shrink wrap and logs from fireplace.
6. Place back base and fireplace in desired location.
7. Connect gas line and electrical wiring at this time in accor-
dance with local codes.
8. Place mantel assembly around fireplace and center. Replace
the screw removed in step 3 to secure fireplace to mantel
assembly.