Edimax Technology EW-7206Apg - Manual (Page 22)

Wireless LAN Access Point Configuration
Active Wireless Client Table
“Active Wireless Client Table” records the status of all active wireless stations that
are connecting to the access point. You can lookup the MAC Address, Number of
Transmitted Packets, Number of Received Packets and Encryption Status of each
active wireless client in this table.
Parameter Description
MAC Address MAC address of this active wireless station.
Tx Packet
The number of transmitted packets that are sent out from this active
wireless station.
Rx Packet
The number of received packets that are received by this active wireless
station.
TX Rate The transmission rate in Mbps.
Power Saving Shows if the wireless client is in Power Saving mode.
Expired Time
The time in second before dissociation. If the wireless keeps idle long
than the expired time, this access point will dissociate it. The wireless
client station has to associate again when it become active.
Refresh Refresh the “Active Wireless Client Table”.
Close Refresh the “Active Wireless Client Table”.
20