1x only – Edimax Technology EW-7206Apg User Manual
Page 29
Wireless LAN Access Point Configuration
802.1x only
IEEE 802.1x is an authentication protocol. Every user must use a valid account to
login to this Access Point before accessing the wireless LAN. The authentication is
processed by a RADIUS server. This mode only authenticates user by IEEE 802.1x,
but it does not encryption the data during communication. You can use 802.1x
without encryption in “AP mode”, “AP Bridge-WDS mode” and “Universal Repeater
mode”.
Parameter
Description
RADIUS Server IP address
The IP address of external RADIUS server.
RADIUS Server Port
The service port of the external RADIUS server.
RADIUS Server Password
The password used by external RADIUS server.
Click Apply button at the bottom of the screen to save the above configurations. You can now configure
other advance sections or start using the Access Point.
27