Edimax Technology EW-7206Apg - Manual (Page 23)

Wireless LAN Access Point Configuration
Wireless Site Survey
When this access point is in “Station-Ad Hoc mode”, “Station-Infrastructure mode”
or “Universal Repeater mode”, it should associate with an access point or station and
connect to your wireless LAN through the associated access point or station.
“Wireless Site Survey” searches for all available access points near by. You can
select one access point listed in this table.
3.2.3 Adva nce d Se tt ing
You can set advanced parameters of this access point. The parameters include
Authentication Type, Fragment Threshold, RTS Threshold, Beacon Interval, Tx
Operation Rate, Tx Basic Rate, Preamble Type, Broadcast ESSID. You should not
change these parameters unless you know what effect the changes will have on this
access point.
21