Remote control unit, How to insert the batteries – Esoteric P-01 User Manual

Page 13

Advertising
background image

13

Remote Control Unit

Battery Replacement

If the distance required between the remote control unit and
main unit decreases, the batteries are weak. If this is the case,
replace the batteries with fresh ones.

Precautions concerning batteries

<

Be sure to insert the batteries with correct positive “+” and
negative “_” polarities.

<

Use batteries of the same type. Never use different types of
batteries together.

<

Rechargeable and non-rechargeable batteries can be used.
Refer to the precautions on their labels.

<

When the remote control unit is not to be used for a long
time (more than a month), remove the batteries from the
remote control unit to prevent them from leaking. If they
leak, wipe away the liquid inside the battery compartment
and replace the batteries with new ones.

<

Do not heat or disassemble batteries and never dispose of old
batteries by throwing them in a fire.

How to insert the batteries

Remove the cover of the remote control unit with a
screwdriver. After checking the polarity (+/_) of two AA
batteries, insert the batteries, replace the cover and replace
the screws.

Notes on use

<

Point the remote control unit at the player’s remote sensor
and use it within seven meters (20 feet) of the player. There
should not be any obstacles between the player and the
remote control unit.

<

Do not allow direct sun or other light to shine on the remote
sensor part of the player. This may cause the remote control
unit to work incorrectly.

<

Note that other units with remote controls may operate
incorrectly because of infrared light “overspill” when you
operate this remote control unit.

Remote Sensor

7m

Advertising