Esoteric P-01 - Manual (Page 26)

26
Settings (introduction)
Turn on the main unit. 1
Press the SETUP button to enter the setup menu. 2
“AudioSetup” appears on the front panel display.
< In this manual, factory settings are marked with an asterisk
“*”.
< Although it is possible to enter the setup menu while
playback is continuing, not all menu functions will be
available. Increase the number of available functions by
pressing the STOP button.
< Exit the setup menu by pressing SETUP once again.
Use the cursor buttons to navigate the menus. 3
When a option marked with “>” is displayed, use the up
or down cursor buttons to change the setting, and press
the ENTER button to confirm the entry. 4
Exit the setup menu by pressing SETUP once more. 5
< Refer to the Setup Menu Chart on the next page.
< The options you can change are marked with “>”.
< Use the left and up cursor buttons (or the RETURN button) to
go back a level in the setup menu.
< When a numerical value (such as speaker distance) is
changed, the value is confirmed without pressing the ENTER
button.
< Individual menu functions are described on pages 28 and 29.
< Repeat steps and as required. 4 3
Restoring factory default settings
If you have made a lot of changes to the setup, and want to
restart from a known set of options, restore the unit to the
factory default settings as follows:
1. If the unit is on, press the POWER switch to turn it off.
2. While holding down the STOP button, press the POWER
switch.
All memories are erased, and the unit returns to the factory
default settings.
Power Supply Unit Main Unit