Starting warm engine, Stopping engine – Echo PRO ATTACHMENT SERIES PAS-265 User Manual

Page 15

Advertising
background image

P

ro

A

ttAchment

S

erieS

tm

15

o

PerAtor

'

S

m

AnuAl

startInG

warm

enGIne

The starting procedure is the same as Cold Start except DO NOT close

the choke, and do not depress throttle trigger to wide open position.

wArning

The attachment should not move at idle, otherwise serious personal

injury may result.

NOTE

If attachment moves, readjust carburetor according to “Carburetor

Adjustment” instructions in this manual or see your ECHO Dealer.

1. Stop Switch

Move stop switch button/lever (A) away from the STOP position.

2. Purge Bulb

Pump purge bulb (C) until fuel is visible and flows freely in the

clear fuel tank return line. Pump bulb an additional 4 or 5 times.

C

A

3. Recoil Starter

Lay the unit on a flat area and keep movable attachment parts clear

of all obstacles. Rapidly pull recoil starter handle/rope (D) until

engine fires.

NOTE

If engine does not start after 5 pulls, use Cold Start Procedure.

D

stoppInG

enGIne

1. Throttle

Release throttle and allow engine to return to idle before shutting off

engine.

2. Stop Switch

Move stop switch button (A) backward to STOP position.

wArning

If engine does not stop when stop switch is moved to STOP posi-

tion, close choke - COLD START position - to stall engine. Have

your ECHO dealer repair stop switch before using unit again.

A

Advertising