Epson EM07ZS1647F - Manual (Page 40)

2. Installation
(6) Allow the default components to be installed.
(7) Select the protocol: DeviceNet you will be using. If you also use PROFIBUS DP,
select Profibus-DP as well. Select which type of device data files to install (EDS for
DeviceNet, GSD for PROFIBUS DP).
(8) Complete the installation.
(9) The message to ensure the restart appears. Click the Yes button.
(10) Start the C:\Install\FieldBus\Install\SP\Setup.EXE and install the service pack.
No installation is necessary when a service pack is not attached to controller.
(11) After completing the installation of the service pack, shutdown the computer.
(12) Proceed to 2.5.4 Board Installation.
28 Fieldbus I/O Rev.6