Energy Tech Laboratories EH-01-03 - Manual (Page 14)

Any question, please call CUSTOMER SERVICE 1-866-454-2588 Model:EH-01-03
14
Remove the 8 screws on the back “cage panel” with a Phillips type screw driver. Carefully
remove the honeycomb filter. You can clean the filter in warm water with a good quality
humidifier filter cleaner, or use one capful of liquid bleach or dish cleaning detergent in a large
container that holds at least two gallons of water.
DO NOT PUT IN DISWASHER!
Soak the filter overnight, and then thoroughly rinse with cool clean water.
If after cleaning and rinsing the filter still has scaling or other mineral build up, you may need to
replace the filter which is available from customer service.
Replacing the filter:
Place the filter back into the back of the unit
Place the Cage Panel back in place and insert the eight Phillips screws make that you
do not over tighten.
Customer Service provides five-year check up:
BIP offer a five year comprehensive check-up for your Comfort Mist , where all filters will be
replaced and the unit thoroughly cleaned and checked and brought back to “new” condition.
Please contact customer service for details and cost.