Ecom Instruments x.com 400/401 User Manual

Page 20

Advertising
background image

85

Increasing the battery duration of your phone

- Only press the keys when it is truly necessary. Every keystroke activates the background light

and with that increases power use.

- Do not cover the antenna with your fingers.

Charging the battery

Your phone is supplied with power via a rechargeable battery. Before a

new battery can be used for the first time it must have been charged for

at least 8 hours. The full battery performance is only obtained after a few

operating cycles.

If the battery charge level decreases below the operating value, the

phone will indicate this (the empty battery symbol flashes). When this

appears charge the battery for at least 15 minutes before making any

other calls, in order to prevent your discussion from being interrupted.

Proceed as follows to charge the battery:

Connect the charger to a wall outlet.

Version

x.

com 50x –Ex / 60x –Ex:

- Remove the safety lock!

Place the end of the cable into the lower phone connection.

The phone‘s battery will now be charged.

The scrolling battery symbol indicates that the battery is being

charged. When the battery is fully charged the charging process

stops automatically. Pull out the cable from the phone.

Version

x.

com 50x –Ex / 60x –Ex:

- Set up the safety lock.

Batteries can easily become warm during the charging process.

This is a normal occurrence.

BAL x.com 401_UK.indd 85

08.01.2008 10:00:11 Uhr

Advertising
This manual is related to the following products: