Ecom Instruments x.com 400/401 - Manual (Page 22)

87
Storing a new contact
- Display the Phonebook, press [Options], then select Add SIM contact or
Add phone contact.
- Enter the last name and press the navigator.
- Enter the number and press the navigator [OK].
Note: You can fill other fields if you store the contact in the phone memory (email, address,
ring tone, photo, etc.).
- Press [Save] to save it.
Calling a contact
Several ways:
- Select a contact. Press , to start the call.
- Select a contact, press [OK]. The number is displayed. Press [Call] to start the call.
- Direct call from the idle screen (only for the contacts stored in the SIM card memory): type the
number with which the contact was saved and then enter * (example: 21 *), or enter the number
and confirm pressing [#]. Then confirm the displayed number.
Contact options
To display the various options, select a contact and press [Options].
Modifying a contact
Modify what you want and validate; then select Save once the modifications are completed.
Sending a message
Information on sending an SMS or MMS to a contact can be found in the Messages chapter.
BAL x.com 401_UK.indd 87 08.01.2008 10:00:12 Uhr