Eagle Electronics Cuda 128 Portable - Manual (Page 47)

43
Fish I.D. is most handy when you're in another part of the boat or
performing some task that prevents you from watching the sonar
screen. Then, you can turn on Fish I.D. and the audible
FISH ALARM .
When that lunker swims under your boat, you'll hear it!
Fish I.D. can also be useful when you want to screen out some of the
sonar detail gathered by your unit. For example, it can help cut through
the clutter of suspended bubbles caused by wave action or boat wakes.
To turn Fish I.D. off, press MENU until the F
ISH
ID menu appears. Press
DOWN ARROW to select O
FF
, then press PWR . To turn it back on, repeat
the above steps, but press UP ARROW to select O N
.
FISHTRACK™
The FishTrack
 feature shows the depth of a fish symbol when it
appears on the display. To turn it on, press MENU until the F
ISH
ID menu
appears. Press UP ARROW to select T
RACK
O
N
, then press PWR . To turn it
off, repeat the above steps, but press DOWN ARROW to select O FF
. (If you
want to turn off FishTrack depths but leave Fish I.D. on, press DOWN
ARROW to select O
N
, then press PWR .) Remember, Fish I.D. must be on
in order to use the FishTrack feature.
Fish ID menu and symbol with FishTrack on. The fish is 44 feet deep.
Fish I.D. symbols
showing FishTrack
depth indicator