Elation Professional Landscape Lighting - Manual (Page 20)

Design LED Par Zoom MH™
©Elation Professional 20 Design LED Par Zoom MH™
CLMT Clear fixture running time
5 RPAN ON/OFF Reverses the pan movements
6 RTLT ON/OFF Reverses the tilt movements
7 FINE ON/OFF Switch between 16 bit/8 bit
8 DEGR 540/630 Pan degree select
9 MIC M-XX Mic sensitivity
VALU D–XX D-00 (DXXX)
Display the DMX512 value of each
channel
D ON ON/OFF Display turn off after 2mins
FLIP ON/OFF This function will reverse the display 180
10 DISP
LOCK ON/OFF Key Lock
RDMX ON/OFF
Change DMX address via external
controller
DFSE ON/OFF Resets all the fixture functions to default
FEED ON/OFF Pan/tilt feedback (error correction) on/off
HIBE OFF/1~99M 15M Standby mode
VER V1.0~V9.9 Software version
CODE CXXX Fixture code *code is “C050”
11 SPEC
ADJU
CH01~CHXX XXXX(-128~127) Motor Calibration
STEP S–01 ~S–48 Set the amount of your program
PAN
PANF
TILT
TILF
RED
GREN
BLUE
MACO
ZOOM
STRB
DIMM
SPED
PROG XXX (000~255)
XXX (000~255)
XXX (000~255)
XXX (000~255)
XXX (000~255)
XXX (000~255)
XXX (000~255)
XXX (000~255)
XXX (000~255)
XXX (000~255)
XXX (000~255)
XXX (000~255)
XXX (000~255)
Edit the channels of each scene
TIME T XXX(001~999) Time for each scene
SCXX
CEDT ON/OFF Edit program via controller
REC. RE.XX Auto Save
12 EDIT
RUN ON/OFF Program test
Main Menu Functions
1. ADDRESS MENU
- AOO1 - A511 (Value) - This is where you set the fixtures DMX address.
Setting/Changing the DMX Address
This function is used to set or adjust the fixture’s starting DMX address. Every device
controlled by DMX has to have a unique starting address. The addressing feature is
what allows DMX to function properly. The DMX address of a fixture is what allows it to