Elation Professional Landscape Lighting - Manual (Page 6)

Design LED Par Zoom MH™
©Elation Professional 6 Design LED Par Zoom MH™
2. SAFETY INSTRUCTIONS
The Design LED Par Zoom MH™ is an extremely sophisticated
piece of electronic equipment. To guarantee a smooth operation,
it is important to follow the guidelines in this manual. The
manufacturer of this device will not accept responsibility for
damages resulting from the misuse of this fixture due to the
disregard of the information printed in this manual.
1. Always be sure that the fan and the air inlets remain clean and are never blocked.
Allow about 6” (15cm) between this fixture and other devices or a wall to allow for
proper cooling.
2. Never touch the fixture during normal operation. This can cause severe personal
injuries and/or damage to the fixture.
3. Be sure to unplug the DESIGN LED PAR ZOOM MH™ from the power outlet
before performing any service related issues.
4. Never look directly into the light beam. You risk injury to your retina, which may
induce blindness.
5. For safe operation, follow the Installation guide described in chapter two of this
manual. Operating the DESIGN LED PAR ZOOM MH™ without suited safety aids
such as safety cables or clamps can increase the risk of damage and/or personal
injury.
6. Installation should only be performed by qualified and certified personal.
7. When mounting this fixture, use only the original rigging parts included with this
fixture. Any structural modification will void the original manufactures warranty and
may increase the risk of damage and/or personal injury.
8. To reduce the risk of fire or shock, do not expose this fixture to rain or moisture.
9. Do not attempt to operate this fixture if the power cord has become damaged or
frayed.
Important Notice: Damages resulting from the disregard of safety and general user
instructions found in this user manual are not subject to any warranty claims.