Eiki LC-XB23C - Manual (Page 20)

20
Basic Operation
ON
- OFF
POWER
KEYST
ONE
INPUT
WARNING LAMP REPLA
MENU
- VOLUME
+ VOLU
ME
SELECT
Top Control
Menu bar
Pointer
(red framed )
Menu icon
Item data
Press the Point 7 8
buttons to adjust the
value.
SELECT
button
Pointer (red framed )
Press the Point ed buttons
to move the pointer.
Item
How to Operate the On-Screen Menu
MENU button
SELECT button
POINT button
(outer ring)
On-Screen Menu
Quit
Exit this menu.
The projector can be adjusted or set via the On-Screen
Menu. Refer to the following pages regarding each
adjustment and setting procedures.
Press the Point 7 8 buttons to select a Menu icon to
adjust and press the Point ed buttons to select an
item to adjust.
Press the SELECT button to show the item
data. To adjust the data, press the Point 7 8 buttons.
Refer to the following pages for each adjustment.
To close the On-Screen Menu, press the MENU
button again .
Press the MENU button to display the On-Screen
Menu.
✔
Note:
The selected item is not active until the SELECT button is pressed.
1
2
3
SELECT button
POINT buttons
Remote Control
MENU button