Eiki LC-XB23C - Manual (Page 48)

48
This function is used to reset the lamp replacement
counter. When replacing the projection lamp, reset the
lamp replacement counter by using this function. See page
53 for operation.
Lamp counter
Factory default
This function returns all setting values except for the user
logo, PIN code lock, Logo PIN code lock and the lamp
counter to the factory default settings.
Select Factory default and
this box will appear. Select
[Yes] , and the next box will
appear.
Factory default
Select [Yes] to
activate it.
This function provides the following alternatives in the
cooling fans' operation after turning off the projector. (p19)
L1 . . . . . . .normal operation
L2 . . . . .slower and lower-sound than the normal
operation (L1), but it takes longer to cool the
projector down.
Fan
Setting
Exit the Setting Menu.
Quit