Eclipse - Fujitsu Ten AVN5495 EN - Manual (Page 12)

- 12 -
- Using the splicing connector -
Insert the connection cable [vehicle speed pulse
signal cable (purple/white), parking brake signal
cable (red/white) or reverse signal cable (green)]
from the main unit and the vehicle cable into the
splicing connector.
1
Push in the terminal (the metal part) of the
splicing connector using a pair of pliers.
2
Harness in the car
Vehicle speed pulse signal cable
(purple/white), parking brake cable
(red/white) or reverse cable (green)
Splicing connector 7
Press down the cover of the splicing connector
and squeeze it until it locks.
3
Lock
Splicing connector 7