Eclipse - Fujitsu Ten AVN5495 EN - Manual (Page 15)

- 15 -
- Installation inside the vehicle (example) -
Choose an installation location on the dashboard
which is flat and has a clear view of the sky.
1
Install the ground plate to the dashboard. 2
Install the GPS antenna to the ground plate. 3
Ground plate 10
Secure the GPS antenna cable with clamps. 4
Route the GPS antenna cable along the crevice
between the front windshield and the dashboard.
5
Route the GPS antenna to the main unit
installation position.
6
Harness fixing tape 14
GPS antenna 8
Front of vehicle
Front of vehicle
Tape
GPS antenna 8
Clamp
(metal) 12
Clamp 12
GPS antenna cable 8
Select a location that is at least 19.68 in. away
from the main unit. If this is not done, the GPS
measurement precision will drop.
Tip
If the GPS antenna cable protrudes from the
dashboard, wind tape around it so that it stays
securely fixed in the crevice between the front
windshield and the dashboard.
Tip
If installing the GPS antenna inside the vehicle, the installation location and the shape of the vehicle's
body determine GPS accuracy. Accuracy is usually lower when the GPS antenna is installed inside
the vehicle.
Tip
Cut the harness fixing tape into usable lengths
with scissors. Do the same for the rest of the
installation.
Tip
Tip
Tip