Electro-Voice System Controller NetMax N8000 - Manual (Page 31)

Appendix
31
NetMax N8000 System Controller
Owner’s manual
5 Appendix
5.1 Application Example
Installation in a multi-purpose hall
The following figure shows an example for the application of a N8000 system controller in a multi-
purpose hall. Four microphones, one CD player and one tuner are the connected signal sources.
Both active and passive speakers are used for the sound reinforcement. The Electro-Voice
Precision Series Remote Amplifiers which are used for the operation of the passive speakers are
connected with the N8000 via the CAN Bus in addition to the audio connections.
Two different methods are designed in order to operate and control the system. The first
possibility is a conventional PC where the IRIS-Net (Intelligent Remote & Integrated Supervision)
software is used to operate the N8000 and the remote amplifiers. It is not only possible to operate
and control the system via IRIS-Net, but also to monitor the whole system. The N8000 and the
PC are connected via Ethernet. Connecting a touch panel (e.g. AMX™, Crestron™) to the RS-
232-interface of the N8000 is the second possibility for the operation of the system. The desired
functions of the system can be accessed via the special operating interface of the touch panel.
Installation in a multi-purpose hall