Electro-Voice System Controller NetMax N8000 - Manual (Page 7)

Introduction
7
NetMax N8000 System Controller
Owner’s manual
The NetMax N8000 is equipped with all relevant interfaces by default in order to provide the
connection to the network and external components. The Ethernet port makes the connection to
existing building networks (intranet) and communication via the Internet possible. Ethernet is also
the common connection between one or more N8000s and a PC with IRIS-Net software for the
configuration, control and monitoring of a complete NetMax system. Two RS-232 serial ports can
be used in order to control the N8000 from external multi-media systems, e.g. Crestron™ or
AMX™. For that, an open interface protocol is available. The remote CAN-bus serves as
connection to Electro-Voice remote amplifiers. Up to 100 amplifiers can be attached via CAN to
one single N8000. Together with additional N8000s and amplifiers they can also be integrated in
a complex and powerful audio system. The NetMax N8000 also has a control port which offers
freely programmable control inputs and outputs. Switches, potentiometers or external control
voltages can be connected to the control inputs (GPIs). Any logic and analog functions can be
programmed. External elements which can be used to signal certain states can be attached to
the control outputs (GPOs). A PC can be connected to the USB port on the front faceplate if the
N8000 has been installed in a rack and the Ethernet port cannot be reached easily. Via the USB
interface the network parameters of the N8000 can be edited and files containing the entire
N8000 configuration can be transferred.
The highest standards regarding construction and mechanical working have been followed. The
chassis is extremely robust and, therefore, effectively protects the electronics against outside
influences. A temperature controlled fan provides thermal stability and also constant ambient
conditions inside the device. All audio interfaces are electronically balanced and have Phoenix
screw terminal connectors.
By reading this instruction manual you will get to know many additional features and functions of
the NetMax N8000. Please read on attentively and keep this manual in order to be able to
consult it at any time.
1.3 Unpacking and warranty
Please open the packaging and uncase the N8000. The following accessories are added to the
device:
• N8000 owner’s manual (this document)
• Power supply cord
• 2 CAN terminating impedances
• 2 Phoenix connectors (6-pin)
• Warranty card
Please completely fill out the warranty card in the event that you need to make a warranty claim.
We also ask you to keep the sales slip and the packaging together with the warrenty card in case
the unit has to be returned.