Emerson EM6120-2 - Manual (Page 13)

Additional handsets
It is possible to register up to 5 handsets to the base (2 handsets are
included) additional handsets may be purchased separately. If you
would like to purchase additional handsets, please contact our customer
service department at: 1-877-768-8483 (Toll Free) or [email protected]
Transferring a call to another handset
1. Press and HOLD the button.
2. Dial the number of the handset you would like to transfer
the call to.
3. If the handset dialed answers, you can have an internal
conversation.
4. Press to end the internal conversation and transfer
the call.
5. If the handset dialed does not answer, press to
speak to the external caller again.
Conference call (2 internal handsets and an
external caller)
1. While on the line with an external caller, press and HOLD
the button (the external line is put on hold).
2. Dial the number of the handset you would like to include
in the call.
3. If the handset dialed answers, press the soft
key to merge the calls.
Adding a new handset
The two handsets that are included in this package are
already registered, use the steps below to register new
handsets only.
1. Press the button to enter the menu.
2. Use the ▲ and ▼ buttons and select “Handset” and
press the softkey.
3. Use the ▲ and ▼ buttons and select “Registration” and
press the softkey.
4. Select “Register” and press the softkey.
5. Select “Base 1” and press the softkey.
6. When “System PIN:” appears on the display enter 0000
and press the softkey.
7. When “Press And Hold Page Key On Base” appears on
the display, press and HOLD the button on the
base (approximately 30 seconds) until “Handset 3, 4, or 5”
appears on the display.
8. Press on the handset and confirm you hear the dial tone.
Removing a handset
Use to remove handsets that are damaged.
1. Follow steps 1-3 (above).
2. Select “De-register”and press the softkey.
3. Enter system pin 0000 and press the softkey.
4. When “Select HS” appears enter the handset number
of the handset you would like to remove (it must be a
handset other then the one you are using) and press the
softkey. “Not Registered” will appear on the
removed handset.
press and hold to register the handset
Copy a phonebook entry to another handset
1. Press the button to open the phonebook.
2. Search by entering the first letter of the desired name
or use the ▲ and ▼ buttons to navigate up or down.
3. Press the softkey and select “Copy Entry” and
press the softkey.
or
Select “Copy All” to copy all entries from one handset to
another (this will erase all the information on the destination
handset).
or
Select “Copy-Merge” to copy all entries from one handset
to another (the information on the destination handset is
not deleted).
4. The available handsets are displayed, use the
▲ and ▼
buttons to select the correct handset and press the
softkey to confirm.
5. “Copying to Handset” is displayed, and “Receive Phone
book Record?” appears on the display of the destination
handset.
6. On the destination handset, press the softkey
to confirm.
rings to answer security code