Emerson EM6120-2 - Manual (Page 15)

Paging
• Press and the handset will emit an alarm
making it easy to find
• Press any key on the
handset to stop the
paging alarm
page handset
volume
delete
1. Press the button to enter the menu.
2. Use the ▲ and ▼ buttons to navigate from the following
menu selections:
Phonebook - Access the phonebook
Handset - “Ring Tone”(incoming calls/intercom), “Ringer
Volume”, “Handset Name”, “Keypad Beep” (on/off),
“Contrast”, “Auto Talk”, “Confirm Beep”, “Select Base”,
“Language”, “Registration”, and “Area Code”
Base Settings - “Ring Tone”, “Ringer Volume”, “Dial Mode”
Time - “Set Alarm”, “Date & Time”(the date and time will
be set automatically after your first incoming Caller
ID call), “Set Time Format”
Tools - “Appointment”, “Stop Watch”
3. Press the softkey to select an option.
4. Press the softkey to go back.
• Adjust the volume of the base
• Adjust the “rings to answer” option (how many rings until
the answering system picks up the call)
• Adjust the “security code” option (the security code is
factory set to 000)
From the handset’s menu you can adjust the base’s ringer volume or select
ringtones - select menu > “Base Settings” > “Ring Tone” or “Ringer Volume”
The base
Power on/off
To turn the answering machine on or off:
Outgoing message
The answering system includes the following factory pre-recorded
message: “Hello, your call cannot be taken at the moment, so please
leave a message after the tone.” To record your own personal outgoing
message follow the steps below:
Volume
rings to
answer
Security
code
rings to answer security code