Emerson EM6120-2 - Manual (Page 17)

Recording an outgoing message:
1. Press and HOLD the button until you hear the tone.
2. Record a brief outgoing message and press the
button. Your outgoing message will be saved and played
back for your confirmation.
3. To listen to your outgoing message press the button.
4. To delete your outgoing message, press the
button while your outgoing message is playing.
You can then record another outgoing message, or the
factory pre-recorded outgoing message will be used by the
answering system.
Playback messages:
• Press the button, the answering system will announce
the total number of messages (old and new), the message
number, and the time and date the message was recorded
followed by the message
Playback messages
When new messages are recorded on the answering system, the display
will flash with the number of new, unheard messages recorded. After all
the new messages have been played back, the number of messages
played back but not deleted (old messages) will appear on the display but
will not flash.
•
Press the button, to pause or resume playback, or
press the button to stop
rings to
answer
security
code