Epson GT-7000 - Manual (Page 24)

1-10 Setting Up the Scanner
PapU-U
Rev. C
A5 size CHAP1.FM
2/1/00 Pass 0
L Proof Sign-off:
E.Omori
_______
<leadername> _______
<editorname> _______
Initialization
Before connecting the scanner to your computer, follow the steps
below to make sure that the scanner is operating properly.
1. Open the document cover so you can see the operation of the
scanner during initialization (startup).
2. Turn on the scanner by pressing the P operate button. The
operate light starts flashing.
3. Make sure the fluorescent lamp on the carriage flashes, and
the carriage moves slightly.
4. The operate light stays on, meaning the scanner has
completed initialization.
5. Turn off the scanner.
If the scanner does not work as described, make sure the power
cord is firmly plugged in and that you have released the
transportation lock, then try again.
c
Caution:
Whenever you turn off the scanner, wait at least 10 seconds before
turning it back on. Rapidly turning the scanner on and off can
damage the scanner.