Epson GT-7000 - Manual (Page 79)

4
Maintenance and Troubleshooting 4-13
PapU-U
Rev. C
A5 size CHAP4.FM
2/1/00 Pass 0
R Proof Sign-off:
E.Omori
_______
<leadername> _______
<editorname> _______
Scanner orientation is
unsuitable. Make sure the scanner is on a flat,
stable surface.
Part of the image is distorted or blurred.
Cause What to do
The document condition
is poor or the document
was placed incorrectly. Make sure the document is uniformly
flat against the document table. A
document that is wrinkled or warped
may not scan well.
c Caution:
Do not place heavy objects on the
document table.
Edges of the document are not scanned.
Cause What to do
The document size
exceeds the readable
scanning area. Position the document so the area you
want to scan is within the edge guide
limits of the document table.
Colors are patchy or distored at the edges of the image.
Cause What to do
The document is too
thick or warped, or there
is too much outside light. A document that is very thick or
warped at the edges can cause
discoloration. Cover the edges of the
document with paper to block outside
light.
The document is not
placed correctly. Make sure the document is flat against
the document table.