Epson GT-7000 - Manual (Page 28)

1-14 Setting Up the Scanner
PapU-U
Rev. C
A5 size CHAP1.FM
2/1/00 Pass 0
L Proof Sign-off:
E.Omori
_______
<leadername> _______
<editorname> _______
If you add the scanner to a system in which one of your SCSI
devices already has a SCSI ID of 2, change the ID number to an
unused number using the rotary switch. See the table below as a
guide.
c
Caution:
Do not set the SCSI ID to an ID number that is already assigned
to another device otherwise the computer, scanner, and other
devices will not operate properly.
ID Availability Description
0 Not available for Macintosh Used for hard disk
Not recommended for
Windows Usually used for hard disk
1 Not recommended Usually used for hard disk
2 Factory setting of the scanner
3 Not available if your Macintosh
has a built-in CD-ROM
4
5
6
7 Not available for Macintosh Always used for the Macintosh
itself
May not be available for
Windows Usually used for the SCSI board
8,9 Not available Never selected
*
* Scanner will not work if selected.