Epson GT-7000 - Manual (Page 53)

3
Options 3-7
PapU-U
Rev. C
A5 size CHAP3.FM
2/1/00 Pass 0
R Proof Sign-off:
E.Omori
_______
<leadername> _______
<editorname> _______
Loading slides and film
You can scan slides and film strip in the 4
×
5 inch (101.6
×
127
mm) scanning area of the Film Adapter.
Note:
❏ Wipe the inside of the Film Adapter cover, the scanner’s document
table, and the narrow window near the hinges before scanning
transparencies.
❏ You need to select TPU for Neg. Film or TPU for Pos. Film in the
Document Source settings in EPSON TWAIN depending on the
type of film (negative or positive) you are scanning. The scanner
software automatically controls the operation of the Film Adapter.
Follow the steps below to load film or slides.
c
Caution:
Hold the film at the edges, or else use gloves. Touching the film
surface with bare hands can leave fingerprints or other traces on
the film.
1. Open the top of the Film Adapter, holding the base down.