Emerson MS9923TT - Manual (Page 15)

14
After all your desired tracks are programmed you may press the “MEMORY” button
to reconfirm that the information has been stored correctly. The display will show
you which disc and track number you have entered into program memory
Number 1. Each time you push the “MEMORY” button the display will show you
which disc number and track number is stored in each successive memory location.
PROGRAMMED PLAYBACK
After you have stored and confirmed the program information, press the
PLAY/PAUSE
button to begin programmed playback. Playback will start at the
first disc and track which you have programmed and will continue until all
programmed discs and tracks (up to a total of 40) have been played.
NOTE: If you press the or Skip buttons during programmed playback, the
player will skip forward or back to the next track and disc which you have
programmed, not the next track on the disc which is being played.
TO CLEAR THE PROGRAM MEMORY
If the disc is playing, press the STOP button to stop the discs. Then press the
STOP button again to clear the program memory..
REPEAT FUNCTION
This system has a four-way repeat function which allows you to continuously repeat
one track, one disc, all discs, or all of the tracks which you have programmed.
1.) ONE TRACK REPEAT
• Press the “REPEAT” button until the Indicator appears in the CD
display.
• Use the “SKIP” buttons (and the “CD/DISC SKIP” button, if necessary) to
select the exact track that you wish to repeat.
• Press the PLAY/PAUSE button to begin one track repeat. The selected
track will begin playing. It will repeat continuously until f u n c t i o n i s
cancelled.
REPEAT
ONE
REPEAT
ONE
MS9923TT_ib_0416.p65 16/4/2002, 14:17 14