Emerson MS9923TT - Manual (Page 19)

18
FAST FORWARD AND REWIND BUTTONS
Press either “F.FWD” or “REWIND” key at any time to move the tape rapidly forward
or back to any specific point. When you reach the desired point press the “PLAY”
key again to resume normal playback at that point.
Note : The Automatic Stop System does not function in the Fast Forward or
Rewind modes. If you fast forward or rewind to the end or beginning of the tape,
the “F.FWD” or “REWIND” keys will remain engaged and the tape motor continues
to run. Be sure to press the “STOP/EJECT” key to cancel Fast Forward or Rewind
and shut off the tape motor.
PAUSE BUTTON
Press the “PAUSE” key to momentarily stop the tape movement in Playback or
Recording modes. The tape movement stops but the tape motor continues to run.
Press the “PAUSE” key again to cancel Pause and resume normal playback.
NOTE: The “PAUSE” key has no effect in the Fast Forward or Rewind modes.
CONTINUOUS PLAYBACK OF TWO CASSETTES
1.) Insert pre-recorded cassettes in both decks with the tape you wish to hear first
in Deck B.
2.) Press “PLAY” key of Deck B, then press the “PAUSE” key and “PLAY” key of
Deck A.
3.) The tape in Deck B will start playing. When the tape in Deck B ends, the “PAUSE”
key of Deck A releases automatically and the tape in Deck A begins to play.
4.) When the tape in Deck A ends both mechanisms stop. To play the other sides,
turn both tapes over and repeat Steps 1 and 2 above.
MS9923TT_ib_0416.p65 16/4/2002, 14:17 18