EverFocus HD CCTV EQH5000 - Manual (Page 23)

24
9. OSD MANUAL
• Day / Night
- MODE
Using Left / Right button, select TDN(True Day & Night) modes – AUTO,
EXT, COLOR, and BW.
AUTO Controlled by AGC level in the processor. (AGC Type)
EXT Controlled by signal from CDS sensor. (CDS Type)
COLOR Fixed Day State. Color Image.
BW Fixed Night State. BW Image.
- DAY/Night Levels
This menu can be displayed by selecting AUTO or EXT in the MODE Menu.
The Day Level and Night Level thresholds function independently from each other.
- DAY LEVEL
The threshold of change from B&W Mode to Color Mode can be adjusted with values
between 0 - 127. A lower value will prevent the camera from switching to Color until
the scene becomes brighter.
- NIGHT LEVEL
The threshold of change from Color Mode to B&W Mode can be adjusted with values
between 0 - 127. A higher value will prevent the camera from switching to B&W until
the scene becomes darker.
Note: These is a built in offset between the Day and Night Level to prevent a
switching level conflict. The effective Day level can not be set lower than
the Night level
[ DAY / NIGHT ]
MODE
DAY LEVEL
NIGHT LEVEL
ESC
EXIT
SAVE & EXIT
AUTO
50
100