Edirol R-09 - Manual (Page 4)

4
Names of things and what they do
fig.names1.eps_60
Internal MIC
These stereo microphones are built into the R-09. ➜ “Using the internal microphones” (p. 29)
Display
The display shows information about the R-09. ➜ “Information shown in the display” (p. 12)
PEAK indicator
This indicator lights up when the input or output volume is too high. If the [PEAK Indicator] is lit
while recording, the recording will be distorted. Decrease the volume with the [(-) Input Level
Button].
➜ “Adjusting recording levels” (p. 37)
FINDER/MENU button
The FINDER/MENU button is used to change screens or to EXIT (cancel operations or
return to previous screen).
➜ “Basic operations” (p. 13)
REVERB button
The REVERB button turns the reverb feature on/off and changes the reverb type.
➜ “Applying reverb effects during playback” (p. 54)
REVERB
REVERB is an effect that can be used to, for example, make it seem as if the sound were being played in
a large hall. Four types of reverb are available: hall1, hall2, room, or plate.
➜ “Reverb type” (p. 54)
Current Screen Operation
<Main Screen> (p. 11)
Changes to <Finder Screen>
Changes to <Menu Screen> when button is held down
<Finder Screen> (p. 11)
<Menu Screen> (p. 11)
Cancels operation or returns to previous screen or <Main Screen>
8
3
2
6 5 4
9
7
1
1
2
3
4
5
R-09_e.book 4 ページ ２００７年２月１３日 火曜日 午後３時２７分