Edirol R-09 - Manual (Page 89)

89
R-09 Configuration Settings
See “Formatting” (p. 19) for information about formatting memory cards.
You can restore all the settings that the R-09 originally had when it left the factory by carrying out the
procedure below. This operation does not delete songs on the memory card.
fig.systeminitialize-e.eps_80
1.
Select “Factory Reset” from the <Menu
Screen>.
Use the [PLAY Button ] and [STOP Button ] to select
“Factory Reset,” then press the [REC Button].
fig.initialize-2-e.eps_80
2.
Press the [REC Button] to initialize.
A confirmation screen is shown. Press the [REC Button] to
initialize.
fig.initialize-e.eps_80
3.
Select “Yes.”
A confirmation screen is shown.
Use the [RWD Button
] and [FWD Button ] to select
“Yes,” then press the [REC Button].
See the table on p. 73 for initial settings.
When not performing initialization, press the [FINDER/MENU
Button].
fig.process-reset.eps_80
Do not turn off power during initialization.
Formatting SD memory cards (Format)
Initializing the R-09 (Factory Reset)
Move the
cursor
up or down
Enter
Enter
Move cursor
to the left
or right
Enter
R-09_e.book 89 ページ ２００７年２月１３日 火曜日 午後３時２７分