Eiki EIP-1 - Manual (Page 17)

16
5. Menu
Press the Menu key to open the menu. You can press the up or down key to select
the items on the menu; or press Esc to quit the menu. To enter the submenu, please
press Enter key or right key. On the submenu, press the Menu or Esc key on the
remote controller to return to the main menu; or press twice to quit menu.
5.1 Image (VGA mode)
Submenu Purpose Using
Brightness
(**)
To adjust the brightness of
image
Press key to decrease
brightness.
Press to increase
brightness.
(*)
Contrast To control the balance between
the brightest and darkest parts of
the image. You can change the
amount of black and white by
adjusting contrast.
Press key to decrease
contrast.
Press to increase contrast.
(*)
Keystone To modify the biased image
resulted from the improper angle
of projector.
Press key to reduce the
length of lower screen.
Press key to reduce the
length of upper screen.
(*)
Zoom To enlarge/reduce the image Press key to zoom out the
image.
Press key to zoom in the
image (*)
Please press Enter key to
access to zoom pan mode.
In this mode, press keys
to move the image, press Pg
Up and Pg Dn keys on the
remote controller to zoom
in/out of image.
* Press Auto key to return to previous setup.
** If the source is switched to HDTV/DVD 480P, the “Brightness” turns to “Tint”
to adjust the balance between red and blue colors in the image.