Eiki EIP-1 - Manual (Page 3)

2
1. Safety instructions
Before you use the projector, please read this manual thoroughly and
comply with the safety instructions hereunder. Improper use may cause fire,
electric shock, injuries, or reduce the life of your projector.
Warning: Please ensure the projector is grounded properly by connecting the
power cord to a grounded AC outlet. Do not defect the safety purpose of the
grounding type plug.
Warning: Do not cover the lens while the lamp lights.
Warning: To protect your eyes, please do not look at the projector’s light
source.
Warning: To replace the lamp, please turn off and unplug the projector first;
then wait for 1 hour before replacing the lamp. Please refer to
page 25 “Replacing the lamp” for the operation procedure.
Warning: Please use the power cord that comes with your projector. Please
use the grounded jack for safety.
Warning: Please do not block the openings around the projector for safety.
Warning: Do not place any drinks on top of the projector. The projector can
be damaged if wet.
Warning: Do not place the projector in excessively warm or humid areas.
Please avoid direct sunshine.
Warning: To avoid electric shock, please do not dismantle the projector by
yourself if it is not working.
Warning: To prevent your projector from dropping, please be careful when
you move or carry it.