Emerson EV477 - Manual (Page 14)

VCR TO CABLE SYSTEM CONNECTION (CONTINUED)
13
VHF/UHF IN
Cable
from VCR
TV
ALLOWS:
* Recording of nonscrambled channels.
* Use of the programmable timer.
* Recording of one channel while watching another.
(Set the VCR to the TV mode by pressing the TV/VCR
key)
VHF/UHF IN
Cable
from VCR
TV
ALLOWS:
* Recording of channels through the conver-
ter/descrambler box (scrambled and unscrambled).
* Using the programmable timer to record only the
channel selected at the converter/descrambler box.
PREVENTS:
* Recording one channel while watching another.
* Using the VCR tuner to select channels.
NOTE:
To record from converter/descrambler, VCR tuner must
be tuned to the converter output channel, usually chan-
nel 3 or 4.
VHF/UHF IN
Cable
from
Converter/
Descrambler
TV
ALLOWS:
* Recording of unscrambled channels.
* Using the programmable timer.
* Recording an unscrambled channel while watching
any channel selected at the converter/descrambler box.
(Set the VCR to the TV mode by pressing the TV/VCR
key)
PREVENTS:
* Recording scrambled channels.
NOTE:
If you are playing a tape or using the tuner built into the
VCR, the converter must be set to the video channel out-
put of the VCR (either 3 or 4).