Screen is distorted or displays noise – Extron electronic DVI 104 Tx/Rx User Manual
Page 13
Advertising
DVI 104 Tx/Rx • User’s Guide
9
Screen is distorted or displays noise
Ensure that the cable length does not exceed
•
1,640' (500 m).
Ensure
•
that the cables are high quality Multi Mode cable
and are terminated with securely fitting plugs.
Ensure that the graphic resolution is correctly set (see
•
“Setup and Operation”).
View the “Display Properties” of the source device to check
•
the output resolution. The resolution and refresh rate must
match the capabilities of the display device and must not
exceed 1920 x 1200 at 60 Hz.
Try resetting the system by unplugging and reconnecting
•
the DVI connectors or the power jacks.
Advertising