Extron electronic DVI 104 Tx/Rx - Manual (Page 14)

DVI 104 Tx/Rx • User’s Guide
DVI 104
Tx/Rx, cont’d
10
Specifications
N The DVI 104 TX/RX consists of a transmitter (DVI 104 TX)
and a receiver (DVI 104 RX) with fiber optic cables linking the
two units.
N These transceivers are Class 1 laser products. They meet the
safety regulations of IEC-60825, FAD 21, CFR 1040.10, and
FDA 21 CFR 1040.11.
Optical fiber interconnection between transmitter and
receiver
Number/type ................................ 4 fiber optic, multimode
Connectors ..................................... 4 female LC connectors
Operating Distance ....................... Up to 1,640' (500 m)
Video
Gain ................................................. Unity
Maximum data rate....................... 4.95 Gbps (1.65 Gbps per color)
Maximum pixel clock ................... 165 MHz
Resolution range ........................... Up to 1920x1200 or 1080p at 60 Hz
Formats ........................................... RGB and YCbCr digital video
Standards ........................................ DVI 1.0
Video input (transmitter)
Number/signal type ..................... 1 single link DVI
Connectors .................................... 1 male DVI-D
Video output (receiver)
Number/signal type ..................... 1 single link DVI
Connectors .................................... 1 male DVI-D
General
Power .............................................. Supplied by an external power supply or
by the source device’s 5 VDC output on
pin 14 of a DVI connector
External power supply ................ 100 VAC to 240 VAC, 50/60 Hz, external,
to 5 VDC, 4 A, regulated
Power input requirements ........... 5 VDC, 0.1 A
Temperature/humidity ................ Storage -40° to +158°F (-40° to +70°C) /
10% to 90%, noncondensing
Operating +32° to +122°F (0° to +50°C) /
10% to 90%, noncondensing