Enterasys Networks 802.1Q - Manual (Page 39)

Port Filtering Configuration Screen
VLAN Configuration 3-17
3.5.3 Paging Through the Port List
To display additional ports that do not display in the current screen, use the NEXT or PREVIOUS
commands at the bottom of the screen, as follows:
1. To display the next screen, use the arrow keys to highlight NEXT. Press ENTER to view the
entries on the next screen.
2. To display the previous screen, use the arrow keys to highlight PREVIOUS. Press ENTER to
view the entries on the previous screen.
3.6 PORT FILTERING CONFIGURATION SCREEN
When to Use
To perform the following functions:
• Select a port and view a list of VLANs that are configured to have their frames transmitted out
that port.
• Filter out certain incoming frames according to the VLAN List and prevent them from being
switched and transmitted out another port.
• Filter out of all incoming untagged frames so they will not be transmitted out another port.
How to Access
Use the arrow keys to highlight the PORT FILTERING CONFIGURATION menu item on the
802.1Q VLAN Configuration Menu screen and press ENTER. The Port Filtering Configuration
screen displays.
NOTE: The NEXT and PREVIOUS fields will only display if there are further Port List
entries to page through.