Enterasys Networks 802.1Q - Manual (Page 56)

Quick VLAN Walkthrough
3-34 VLAN Configuration
11. Use the SPACE bar to step sequentially through the previously configured VLAN ID numbers.
When the number 0002 (the new VLAN ID) is displayed, the FID field updates to 0002, and
the VLAN Name field updates showing the name assigned to this VLAN, TEST VLAN.
12. Use the arrow keys to highlight the SAVE command at the bottom of the screen. Press ENTER.
The PVID for Port 3 is now configured to the TEST VLAN. The TEST VLAN is also added to
the Port VLAN List for Port 3 with a frame format of Untagged. The screen should now look
like
Figure 3-12 .
Figure 3-12 Walkthrough Stage Two
Now that port 3 belongs to the TEST VLAN, we will designate one port as a 1Q Trunk port for a
connection to another VLAN aware switch. This 1Q Trunk port will carry traffic from all VLANs,
allowing VLAN frames to maintain their VLAN ID across multiple switches.
NOTE: For the purposes of this walkthrough, port 10 will be configured as the trunk
port.
Firmware Revision: XX.XX.XX
Port Assignment Configuration
25992-10
Module Type: xxxxx-xx
BOOTPROM Revision: XX.XX.XX
6C105 LOCAL MANAGEMENT
Slot Number: xx
RETURN EXIT
Port
1
2
3
4
5
6
7
8
9
10
11
12
Port Mode
[1D TRUNK]
[1Q TRUNK]
[HYBRID]
[HYBRID]
[HYBRID]
[HYBRID]
[HYBRID]
[HYBRID]
[HYBRID]
[HYBRID]
[HYBRID]
[HYBRID]
VLAN Name
Default VLAN
Default VLAN
TEST VLAN
Default VLAN
Default VLAN
Default VLAN
Default VLAN
Default VLAN
Default VLAN
Default VLAN
Default VLAN
Default VLAN
SAVE PREVIOUS NEXT
VLAN ID
[0001]
[0001]
[0002]
[0001]
[0001]
[0001]
[0001]
[0001]
[0001]
[0001]
[0001]
[0001]
FID
0001
0001
0002
0001
0001
0001
0001
0001
0001
0001
0001
0001