Enterasys Networks 802.1Q - Manual (Page 44)

VLAN Forwarding Configuration Screen
3-22 VLAN Configuration
3.7.1 Viewing Current VLAN Ports
To display the VLAN Forwarding List for a particular VLAN, proceed as follows:
1. Use the arrow keys to highlight the VLAN ID field. Use the SPACE bar or BACKSPACE to
step to the desired VLAN ID and VLAN Name.
2. Press ENTER. The screen updates to display the VLAN Forwarding List for the selected
VLAN.
3.7.2 Paging Through VLAN Forwarding List Entries
To display additional entries in the VLAN Forwarding List that do not appear on the screen, use
the NEXT or PREVIOUS commands located at the bottom of the screen, as follows:
1. To display the next screen, use the arrow keys to highlight NEXT. Press ENTER to view the
entries on the next screen.
2. To display the previous screen, use the arrow keys to highlight PREVIOUS. Press ENTER to
view the entries on the previous screen.
3.7.3 Adding Forwarding List Entries
To add a port to the VLAN Forwarding List, proceed as follows:
1. Use the arrow keys to highlight the VLAN ID field. Use the SPACE bar or BACKSPACE to
step to the desired VLAN ID and VLAN Name. Press ENTER.
VLAN Name
(Read-Only) See the name associated with the VLAN ID.
ADD/DELETE
(Toggle) Swap the action taken to add or delete a port from the VLAN
Forwarding List.
Port (Selectable) Select the port number of the interface being configured. The MIB2
interface description of the port appears to the right of the Port field.
In
Section 3-8 , ATM PVC VCI-1 VPI-23 is the Port Type for Port 30.
Frame Type (Toggle) Select the format of frames (Tagged or Untagged) that will be
transmitted by the selected port for this VLAN. The default is
Untagged.
Table 3-5 VLAN Forwarding Configuration Screen Field Definitions (Continued)
Use this field … To …