HP 372284-001 - Manual (Page 16)

Installation
3. Plug the CPU connector on the KVM cable (3) into any available KVM socket in the
CPU port section on the switch rear panel. Plug the accompanying microphone connector
(2) and speaker connector (1) into the corresponding jacks.
NOTE: The cables that ship with the Rackmount model do not include audio jacks.
4. Plug the PS/2 mouse connector (1), the PS/2 keyboard connector (2), the microphone
connector (3), the speaker connector (4), and the video connector (5) on the KVM cable
into their respective ports on the computer. Be sure that each plug corresponds to its
intended CPU port socket.
NOTE: The cables that ship with the Rackmount model do not include audio jacks.
NOTE: The switch also supports computers that use USB connectors to transfer keyboard and
mouse data. Cable sets with USB connectors are available for order from the HP website at
http://h18004.www1.hp.com/products/servers/proliantstorage/rack-options/list.html#console.
HP 1x4 USB/PS2 KVM Switch User Guide 2-3