Grounding methods – HP 372284-001 User Manual
Page 44
Electrostatic Discharge
B-2
HP 1x4 USB/PS2 KVM Switch User Guide
Grounding Methods
There are several methods for grounding. Use one or more of the following methods when
handling or installing electrostatic-sensitive parts:
•
Use a wrist strap connected by a ground cord to a grounded workstation or computer
chassis. Wrist straps are flexible straps with a minimum of 1 megohm
±
10% resistance
in the ground cords. To provide proper ground, wear the strap snugly against the skin.
•
Use heel straps, toe straps, or boot straps at standing workstations. Wear the straps on
both feet when standing on conductive floors or dissipating floor mats.
•
Use conductive field service tools.
•
Use a portable field service kit with a folding static-dissipating work mat.
If you do not have any of the suggested equipment for proper grounding, have an authorized
reseller install the part
For more information on static electricity, or assistance with product installation, contact your
authorized reseller.