Hampton Direct H200 - Manual (Page 20)

Hampton H200 Cast Freestanding Woodstove 20
1) Secure 2 Support Gussets to each Side Shelf using 2 screws per
gusset.
2) Secure the Brackets to the middle of the Side Shelves using 2 screws
and washers.
4) Mount side shelf to stove and secure in place using the allen key
provided to secure the 2 set screws.
Support Gussets
Underside of Side Shelf Shown.
Right
Bracket
Underside of Right Hand Side Shelf Shown.
Gusset Side Casting
Left side of stove shown.
Front Casting
Bracket
Cut-Out
Bracket
Cut-Out
NOTE: Ensure that the Bracket cut-out is towards
the back of the stove.
NOTE: When mounting
the side shelf ensure that
the gusset closest to the
front of the stove is against
the top of the Side Casting
and NOT against the side
of the Front Casting. This
will help with alignment
when the stove top is put
back in place.
Underside of Left Hand Side Shelf Shown.
3) Remove stove top.
Left
Bracket
Bracket
Cut-Out
OPTIONAL SIDE SHELF
INSTALLATION
5) Place top back on stove.
INSTALLATION