Harbor Freight Tools 12" Compound Slide Miter Saw 91852 - Manual (Page 2)

SKU 91852 For technical questions, please call 1-800-444-3353. PAGE 2
PRODUCT SPECIFICATIONS
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly, operat-
ing, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep this manual and invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed in the following
pages may result in electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
WORK AREA
1. Keep your work area clean and well lit. Cluttered benches and dark areas
invite accidents.
2. Do not operate power tools in explosive atmospheres, such as in the pres-
ence of flammable liquids, gases, or dust. Power tools create sparks which
may ignite flammables.
E105017
66AJ
REV 06/05; REV 02/06
Electrical Requirements 120 V / 60 Hz / 1800 Input Watts
15 Amp / 4100 RPM Motor
Power Cord Plug Two Prong, Polarized
Power Switch Single Pull Trigger Type
Laser Input Power Two “AAA” Batteries
Laser Switch Push Button
Saw Blade (Included) Diameter/Type 12” Diameter
100-Tooth Carbide Tipped
5000 RPM Rated
Arbor Size 1” Diameter
Crosscut Capacity 12-3/4” x 4” Vertical @ 90°
12-3/4” x 1-15/16” Vertical @ 45°
Blade Tilt Capacity 0° - 45° R & L Miter / 0° - 45° L-Compound
Positive Stops 0°, 15°, 22.5°, 30°, 45° L – R Miter
0°, 45° L Bevel
Turntable Diameter 13-7/8”
Overall Table Size 22-3/4” L x 6-1/2” W
Overall Dimensions 34-1/2” L x 22-7/8” W x 26-1/4” H
Weight 44 Pounds