Handspring Visor - Manual (Page 59)

Chapter 3 Page 59
Locking your handheld
You can also lock your handheld so that you need to enter your
password to operate it.
Important: If you lock your handheld, you must enter the exact
password to re-activate your handheld. If you forget the
password, you need to perform a hard reset to resume
using your handheld. Performing a hard reset deletes all
the records in your handheld; however, you can restore
all previously synchronized data at the next HotSync
operation. See “Performing a hard reset” in Appendix A
for details.
To lock your handheld with a password:
1. Assign a password.
2. Tap Lock & Turn Off.
3. Tap Off & Lock.
4. To start your handheld, turn it on, and then enter the password.
Tap Lock &
Turn Off